LUUM.IO

X-PoE POWERED DEVICE - GENERAL DATA SHEET

Product Overview

The X-PoE powered device serves as an intermediary between the X-PoE port and the connected LED lights or other devices, enabling power transmission and providing support for high power outputs. The PD takes the RJ45 connection from an X-PoE port and converts it to one or two separate channels, each with a pair of positive (+) and negative (-) conductors. These channels are used for powering LEDs or other compatible devices. The PD is capable of providing a total power output of up to 120W¹, and can be daisy-chained to extend the power delivery to additional fixtures or devices.

Note

The PDs can be utilized in both generic and customized configurations, tailored to accommodate specific load types. It is crucial to verify and install the appropriate PD before establishing a connection with an X-PoE lighting controller.

Specifying

To specify the appropriate PD part number, use the following format and table:

X   P   D   -   [ type ]   [ channels ]   [ style ]   -   [ class ]

Type	Channels	Style	Class
[P] - Pass-Thru	[1] - One Channel	[H] - Housing	[A] - Auto Config - 300mA Constant Current
[T] - Terminal	[2] - Two Channel	[P] - Panel Mount	[B] - Auto Config - 400mA Constant Current
	[4] - Four Channel	[IP] - Node	[C] - Auto Config - 500mA Constant Current
		[M] - Mini	[D] - Auto Config - 600mA Constant Current
		[R] - Relay	[E] - Auto Config - 800mA Constant Current
			[F] - Auto Config - 900mA Constant Current
			[G] - Manual Config - Default to 100mA
			[H] - Auto Config - 1,000mA Constant Current
			[J] - Auto Config - 1,200mA Constant Current
			[K] - Auto Config - 24V Constant Voltage
			[L] - Auto Config - 36V Constant Voltage
			[M] - Auto Config - 48V Constant Voltage

Example XPD-T2P-G: Manual config terminal two-channel PD designed to be panel mount

Note

Not all configurations are currently available for ordering. Please contact a Luum team member before placing an order.

Available Data Sheets

Below is a list of the XPD data sheets currently available. If one isn't available, reach out to a Luum team member for more information.

XPD-P2H-G

XPD-T2P-G

Note

All data sheets are shown with a "generic" manual configuration class. Every PD has the ability to be manufactured in whatever class is requested. Some may require special ordering and lead times.

---

1. Maximum 120W per port with a 57V input, see D1.2 - Output Power Range. ↩